...

SMARTSERVER PI IS AVAILABLE WITH SMARTSERVER 4.2 AND HIGHER.

For SmartServer 4.4 and higher, the default SmartServer Pi CMS username and password is apollo / apollo. 

For SmartServer 4.3 Update 1 and prior, the SmartServer Pi CMS password for the default apollo and admin user accounts is configured in the smartserver.ini file with the SmartServer Pi installation. The password that is defined in the smartserver.ini file does not  have any effect on the Raspberry Pi OS / SmartServer Pi Configuration page password. This section describes how to change SmartServer Pi CMS user passwords.

...

The SmartServer Pi OS user accounts and Configuration page login accesses (default user apollo, as set in the Install the Raspberry Pi OS for SmartServer PiSmartConnect section) are not configured with the CMS Users widget, but are managed through the SmartServer Pi Configuration page as with all other OS operations. The SmartServer Pi Configuration page internally uses the Raspberry Pi OS user accounts. The OS is fully client-owned and configured and there is no synchronization between the SmartServer Pi CMS user and OS user accounts. This section also describes how to change the Configuration page and SSH login password using the SmartServer Pi Configuration page Accounts tab as an example.

...

• An uppercase letter ( A-Z )
• A lowercase letter ( a-z )
• A number ( 0, 1, 2, 3, 4, 5, 6, 7, 8, 9 )
• A special character ( ! # $ % & ( ) * + , - . / : ; < = > ? @ [ ] ^ _ ` { | } ~ ); there are no constraints with regards to special characters that are used.

The password must conform to the following restrictions:

...

• Systematic characters (e.g., 1234 and other commonly guessed character patterns) are not allowed.
• The New Password and Confirm New Password entries must match.
• The New Password cannot match any one of the last five passwords.

To reveal the disguised password characters, click the Show Password button ().

...

For SmartServer 4.3 Update 1 and prior, this password change does not effect the password setting in the smartserver.ini file.

Changing  the SmartServer Pi CMS apollo and admin User Passwords

...

To change the password for the SmartServer Pi Configuration page and SSH login, perform the following steps:

1. Open the SmartServer Pi Configuration page.
   
   The SmartServer Pi Configuration page opens. The Configuration tab that appears depends on your cache data.
   
   
   
   
2. Click the Accounts tab.
   
   The Accounts view appears.
   
   
   
   
3. Click on your apollo user account to view and/or manage account settings.
   
   
   
   
4. Click Set Password.
   
   The Set Password dialog box appears.
   
   
   
   
5. Enter the old password in the Old Password field, and new password in the New Password and Confirm New Password fields. The New Password and Confirm New Password entries must match.
   
   
   
   
6. Click Set Password to save the new password.

...