Content Comparison

(Optional) Secure Your SmartServer for configuring System Configuration page settings

(Optional) Switch From LON Management for switching the LON Network Management Mode

(Optional) Secure Your SmartServer, Managing Passwords → Changing the System Password for changing both the apollo system and CMS apollo user passwords

(Optional) Secure Your SmartServer, Managing Passwords → Changing User Passwords for changing only the CMS apollo user password

Reboot Your SmartServer

Reset the SmartServer to Factory Defaults

Update the SmartServer Software

(Optional) Secure Your SmartServer, Managing Passwords → Restoring the Factory System Password with the Connect Button for enabling/disabling password reset using the Connect button

Enhance Security for enabling/disabling enhanced security features

Enhance Security for signed certificates

Enhance Security for enabling 802.1x mutual authentication for eth0 or eth1

SmartServer IoT Getting Started for Remote CMS (Beta) configuration

• Local CMS SmartServer Manager vs. Remote CMSSmartSupervisor
• Set Up up the Remote CMS SmartSupervisor Host Computer
• Install and Start the Remote CMSSmartSupervisor
• Enable Remote CMS for Each SmartServer (Release 4.1 and Prior)
• Connect to the Remote CMS
  
  

Download Logs from the SmartServer
The ability to download logs using the Logs button is available with SmartServer 4.0 and higher.

Configuring HTTP Proxy 
HTTP proxy settings are available with SmartServer 4.0 and higher.

Configure Your SmartServer

Reboot Your SmartServer

(Optional) Add a LON Interface

Add a BACnet Interface

/wiki/spaces/TEMP/pages/1475599(Optional) Remotely Accessing the IAP/MQ Server

(Optional) Add a Modbus RTU Interface

Open the SmartServer IoT CMS