Content Comparison

...

For LON devices, the SmartServer provides two network management modes called LON Device Management Mode (DMM) and LON Independent Management Mode (IMM). In LON DMM, the SmartServer manages the configuration of all LON devices provisioned by the SmartServer. In LON IMM, the SmartServer acts as an independent device in the LON network, and you must provide a network management tool such as the IzoT Commissioning Tool (CT) to manage the network configuration of the LON devices. DMM is the default setting where the SmartServer manages the LON devices in the network. When operating in DMM, all the internal LON routers in the SmartServer are configured by the SmartServer and function as repeaters. In IMM, the SmartServer does not configure its internal routers and they must be configured with the independent network management tool.

...

1. If you defined any LON device interfaces or LON devices prior to switching from LON management mode, delete the interface and device definitions as described in Provisioning, Deprovisioning, and Replacing Devices or delete all definitions as described in Resetting the SmartServer IoT to Factory Defaults.
   
   
2. To set the LON management mode, click the Action button () on the Devices widget.
   
   
   
   
3. Select the Switch to LON Device Management Mode or Switch to LON Independent Management Mode action as appropriate for your system.
   
   
   
   
4. Click YES in the Confirmation dialog box to confirm the management mode change.
   
   

...