/
Update the i.LON 700 Software
Update the i.LON 700 Software
You can update your i.LON 700 software to a newer release, if available, and you can re-image your i.LON 700 with the same release that is already loaded on your i.LON 700 to start over with a factory configuration. You can use the following methods to update or re-image your i.LON 700:
- Update or re-image using the i.LON 700 Configuration Page and a USB flash drive as described in Update with the i.LON 700 Configuration Page.
This method is the easiest method if your i.LON 700 does not have an Internet connection. You download a i.LON 700 image using a computer with an Internet connection, copy the image to a USB flash drive, plug the USB flash drive into your i.LON 700, and then start the update or re-image from the i.LON 700 Configuration Page. Refer to the Configure the i.LON 700 section for more information about the Configuration UI settings and functions. - Update or re-image using the i.LON 700 console interface and a USB flash drive as described in Update with the i.LON 700 Console.
This method is the easiest if you want to delete all of your data and re-image your i.LON 700 at the same time. You download a i.LON 700 image using a computer with an Internet connection, copy the image to a USB flash drive, plug the USB flash drive into your i.LON 700, and then start the update or re-image from the i.LON 700 console interface.
, multiple selections available,
Related content
Migrating from the i.LON 700 to the SmartServer
Migrating from the i.LON 700 to the SmartServer
More like this
Updating the U70 Firmware
Updating the U70 Firmware
More like this
Updating or Re-imaging the SmartServer IoT
Updating or Re-imaging the SmartServer IoT
More like this
Updating or Re-imaging the SmartServer with the SmartServer Console
Updating or Re-imaging the SmartServer with the SmartServer Console
More like this
Using the IOX LEDs and Buttons
Using the IOX LEDs and Buttons
More like this