THE connections WIDGET IS AVAILABLE WITH SMARTSERVER 3.3 AND HIGHER.
| Info |
|---|
For SmartServer 3.3-3.6, see Expanding / Collapsing the Datapoints View (Release 3.3-3.6). For SmartServer 3.0-3.2, see Defining Datapoint Connections (Release 3.0-3.2). For SmartServer 2.9 or prior, see Defining Datapoint Connections (Release 2.9) |
...
. |
...
You can expand connection templates to show all applied contexts and all datapoint members, or collapse connection templates into a single line each. These features do not require unlocking/locking of operations These features are supported through the Connections widget in both the locked and unlocked states and can be performed from both either the CONNECTION TEMPLATES and DEPLOYED CONNECTIONS tabs or the DEPLOYED CONNECTIONS tab (shown below). This section describes how to expand and collapse the Datapoints column view on the Connections widget (shown below).
To expand connection templates to show all applied contexts and all datapoint members, click the Action button (
) and select the Expand All action, or Expand Selected action if any connections are selected.
Doing so expands the connections datapoints as shown for CON2 and CON3 in the CONNECTION TEMPLATES tab example below.
To collapse connection templates to a single line each, click the Action button () and select the Collapse All action, or Collapse Selected action if any connections are selected.
Doing so collapses the connections datapoints as shown for CON2 and CON3 in the CONNECTION TEMPLATES tab example below.
