Page Comparison

...

1. Connect to the SmartServer as described in the section Connecting to Your SmartServer.
   
   
2. On a client computer, open a compatible web browser as described in the section /wiki/spaces/TEMP/pages/44041710Open the SmartServer CMS.
   
   

3. In your browser, specify one of the following:   https://SmartServer_IPaddress  or https://smartserver-nnnnnn   (where nnnnnn is the SmartServer's install code. See Connecting to the Console using a LAN Connection as described in the section Connecting to Your SmartServer.) Named access using https://smartserver-nnnnnn works on networks that have a local DNS server. Otherwise, you may need to use https://smartserver-nnnnnn.local.
   
   The login page appears.
   

   Note
   title Enhanced security
   If you re-imaged the SmartServer and /wiki/spaces/TEMP/pages/209397555 enhanced security is enabled on your system, and your password does not meet the requirements, then you will be prompted to reset your password.

   
   
   
   

4. Click Login.
   
   The log in dialog box appears prompting you to enter a username and password.
   
   
   
   
5. Enter the username and password.  The default username is apollo and the default password is printed on the label on the bottom of the SmartServer.  If you changed either the username or password, use the username and password you selected.  Use the defaults if you did not change them.
   
   
6. Click OK to login as appropriate for your web browser.
   
   
7. The Network Configuration page appears enabling you to view and edit these settings. The menu bar at the top of the page provides the ability to go to the System, LON, BACnet, OPC UA, RS-485, and /wiki/spaces/TEMP/pages/1475599Features configuration pages, as well as the /wiki/spaces/TEMP/pages/44041710CMS.