Documents Archive

Manuals

Engineering Bulletins

Software Licenses

SmartServer Prior Releases

Transceivers and Modules

FT 3120 / FT 3150 Smart Transceiver Data Book

FT 5000 EVB Hardware Guide

LonWorks FTT-10A Free Topology Transceiver User's Guide

LonWorks LPT-11 Link Power Transceiver User's Guide

LonWorks Microprocessor Interface Program (MIP) User's Guide

LonWorks PLCA-22 Power Line Communications Analyzer User's Guide

LonWorks PLT-22 Power Line Transceiver User's Guide (110kHz - 140kHz Operation)

LonWorks SMX™ Transceiver Installation Instructions

LPI-10 Link Power Interface Module User's Guide

LPT-10 Link Power Transceiver User's Guide

LTM-10A User's Guide

LTM-10 Motherboard Schematic

PL DSK 2.3 Power Line Smart Transceiver Development Support Kit User's Guide

Power Line Development Support Kit Quick Start Guide

Pyxos FT EVK Quick Start Guide

Pyxos FT EVK User's Guide

Series 5000 Chip Data Book

Development Tools

NodeBuilder FX/PL Examples Guide

NodeBuilder FX User's Guide

Routers and Network Management

DM-20/21 Device Manager User's Guide

Echelon Enterprise Services 2.0 User’s Guide

i.LON 600 LonWorks/IP Server Quick Start Guide

i.LON 600 LonWorks/IP Server User's Guide

i.LON 700 User's Guide

i.LON SmartServer 2.0 Programmer's Reference Guide

i.LON SmartServer 2.0 Programming Tools Quick Start Guide

i.LON SmartServer 2.0 Programming Tools User’s Guide

i.LON Vision 2.2 User's Guide

MPR-50 Multi-Port Router Quick Start Guide

MPR-50 Multi-Port Router User’s Guide

SmartServer 2.2 Hardware Guide

SmartServer 2.2 Power Line Repeating Guide

SmartServer 2.2 Quick Start Guide

SmartServer 2.2 User's Guide

Network Interfaces

PCC/PCLTA Network Interface User's Guide

SLTA-10 Adapter and PSG/3 User's Guide

Network Integrator Software

LonMaker User's Guide Turbo Edition

LonWorks

Implementing Dynamic Network Variables

LonWorks Host Application Programmer's Guide

Troubleshooting LonWorks Devices

Miscellaneous

LonBridge™ Server User’s Guide

PC Board Layout Guidelines

Data Logging with the PLCA-22 Power Line Communications Analyzer

Driving a Seven Segment Display with the Neuron Chip

LonWorks Control Products Environmental Specifications and MTBF Guide

Embedded Software License

OpenLDV Software License

SmartServer Getting Started

Using this Documentation (Release 4.1 and Prior)

System-Level Warnings and Errors (Release 4.0 and Prior)

Accessing the SmartServer Configuration Page (Release 3.4 to 4.1)

Configure Your SmartServer (Release 3.3 and Prior)

Viewing System Information (Release 3.4 to 4.1)

Configuring the SmartServer IP Address and Hostname (Release 3.4 to 4.1)

Open the SmartServer CMS (Release 4.1 and Prior)

Obtaining Licensing Information (Release 3.3)

Customize Your CMS Dashboard (Release 3.5)

Customize Your CMS Dashboard (Release 3.4)

Customize Your CMS Dashboard (Release 3.3 and Prior)

Enhancing Security (Release 4.1 and Prior)

Adding an Access Warning Banner (Release 4.2 Update 1 to 4.4)

Adding an Access Warning Banner (Release 4.2 and Prior)

Managing Passwords (Release 4.1 and Prior)

Managing Ports and Services (Release 4.1 and Prior)

Configuring HTTP Proxy (Release 4.1 and Prior)

(Optional) Add a BACnet Interface (Release 3.2 to 4.1)

(Optional) Setting up BACnet (Release 3.1)

(Optional) Add an EnOcean Interface (Release 4.1 and Prior)

(Optional) Add a LON Interface (Release 4.1 and Prior)

(Optional) Switch From LON Management (Release 3.3 and Prior)

(Optional) Add a Remote Network Interface (RNI) (Release 4.1 and Prior)

(Optional) Add a LON IP-852 Router (Release 4.1 and Prior)

(Optional) Add a LoRaWAN Interface (Beta) (Release 4.1 and Prior)

(Optional) Add a Modbus RTU Interface (Release 4.1 and Prior)

(Optional) Create a LON Interface for a Modbus Device (Release 4.1 and Prior)

(Optional) Remotely Accessing the IAP/MQ Server (Release 4.1 and Prior)

Using the OPC UA Server with AVEVA Edge (Release 4.1 and Prior)

Using the OPC UA Server with GE Cimplicity (Release 4.1 and Prior)

(Optional) Enabling the OPC UA Server (Release 4.1 and Prior)

(Optional) Setting up the BACnet Router (Release 4.1 and Prior)

Migrating from the LPR and MPR Routers to the SmartServer IoT (Release 4.1 and Prior)

SmartConnect Getting Started

(Optional) Add a LoRaWAN Interface for SmartConnect (Release 4.2)

SmartServer IoT Configuration Page Index (Release 4.1 and Prior)

SmartServer User's Guide

Site Planning

Defining Users (Release 4.1)

Defining Users (Release 4.0 and Prior)

Defining Contexts (Release 3.4 - 3.6)

Defining Contexts (Release 3.3 and Prior)

(Optional) Creating a BACnet Device Interface (XIF) Definition (Release 3.1)

(Optional) Creating a Modbus Device Interface (XIF) Definition (Release 3.1)

Defining Device Types (Release 3.4 and 3.5)

Defining Device Types (Release 3.3 and Prior)

Defining Datapoint Properties (Release 3.1)

Site Provisioning

Discovering, Defining, or Importing Devices (Release 4.3 and Prior)

Discovering, Defining, or Importing Devices (Release 3.4 and 3.5)

Discovering, Defining, or Importing Devices (Release 3.3 and Prior)

Importing LON Devices from an LNS Network with IzoT CT (Release 4.1 and Prior)

Importing LON Devices from an LNS Network without IzoT CT (Release 4.1 and Prior)

Provisioning Devices (Release 3.3 and Prior)

Testing Devices (Release 3.3 and Prior)

Site Integration

Defining Connection Templates (Release 3.3-3.6)

Managing Deployed Connections (Release 3.3-3.6)

Exporting / Importing Connection Definitions (Release 3.3-3.6)

Expanding / Collapsing the Datapoints View (Release 3.3-3.6)

Setting Filters on the Connections Widget (Release 3.3-3.6)

Defining Datapoint Connections (Release 3.0-3.2)

Defining Datapoint Connections (Release 2.9)

Creating User Interfaces (Release 3.3 and Prior)

IOX Modbus Software Setup (Release 3.3 and Prior)

Digital Output Configuration (Release 3.3 and Prior)

Digital Input Configuration (Release 3.3 and Prior)

Relay Output (Release 3.3 and Prior)

Metering Input (Release 3.3 and Prior)

Site Operation

Managing Alarm Notifications (Release 4.1 and Prior)

Viewing Active Alarms (Release 2.5 - 3.4)

Site Maintenance

Viewing SmartServer Status (Release 3.3 and Prior)

Downloading Logs (Release 4.1 and Prior)

Managing Customer and User Accounts (Release 3.6 and Prior)

Updating using the SmartServer CMS (Release 3.3 and Prior)

Updating the SmartServer using the SmartServer Configuration Page (Release 4.1 and Prior)

Backing Up, Restoring, and Cloning the SmartServer (Release 3.5)

Backing up and Replacing a SmartServer (Release 3.5)

Backing up and Cloning a SmartServer to Multiple Sites (Release 3.5)

Exporting and Importing SmartServer Configuration Files (Release 3.5)

Backing Up, Restoring, and Cloning the SmartServer (Release 3.4)

Backing Up and Replacing a SmartServer (Release 3.4)

Cloning and Deploying a SmartServer to Multiple Systems (Release 3.4)

Exporting and Importing a SmartServer Configuration (Release 3.4)

Backing Up, Restoring, and Cloning the SmartServer (Release 3.3 and Prior)

Backing Up and Replacing a SmartServer (Release 3.3 and Prior)

Cloning and Deploying a SmartServer to a Multiple Sites (Release 3.3 and Prior)

Managing the SmartServer SD Card (Release 3.4)

Managing the SmartServer SD Card (Release 3.3 and Prior)

Site Diagnostics

Using the UaExpert OPC UA Client (Release 4.1 and Prior)

SmartServer Troubleshooting

Rebooting Your SmartServer (Release 4.1 and Prior)

Resetting the SmartServer to Factory Defaults (Release 4.1 and Prior)

SmartServer IoT Starter Kit User's Guide

Configuring the Network (Release 4.1 and Prior)

Setting up the LON Channel (Release 3.4 to 4.1)

Setting up the LON Channel (Release 3.3 and Prior)

Setting up the Modbus RTU Channel (Release 3.4 to 4.1)

Setting up the Modbus RTU Channel (Release 3.3 and Prior)

Setting up the BACnet Channel (Release 3.4 to 4.1)

Setting up the BACnet Channel (Release 3.3 and Prior)

SmartServer Developer's Guide

Creating Custom Drivers (Release 3.3 and Prior)

Implementation Steps

IDL Driver Example Overview

IDL Driver File Locations

Main.cpp

Example.cpp

Additional Files

Compiling a Custom IDL Driver

Running a Custom IDL Driver

Debugging a Custom IDL Driver

SmartServer IoT Ethernet, RS-485 Ports, and USB Ports