SmartServer Getting Started
This section consists of:
- Using this Documentation (Release 4.1 and Prior)
- System-Level Warnings and Errors (Release 4.0 and Prior)
- Accessing the SmartServer Configuration Page (Release 3.4 to 4.1)
- Configure Your SmartServer (Release 3.3 and Prior)
- Viewing System Information (Release 3.4 to 4.1)
- Configuring the SmartServer IP Address and Hostname (Release 3.4 to 4.1)
- Open the SmartServer CMS (Release 4.1 and Prior)
- Obtaining Licensing Information (Release 3.3)
- Customize Your CMS Dashboard (Release 3.5)
- Customize Your CMS Dashboard (Release 3.4)
- Customize Your CMS Dashboard (Release 3.3 and Prior)
- Enhancing Security (Release 4.1 and Prior)
- Adding an Access Warning Banner (Release 4.2 Update 1 to 4.4)
- Adding an Access Warning Banner (Release 4.2 and Prior)
- Managing Passwords (Release 4.1 and Prior)
- Managing Ports and Services (Release 4.1 and Prior)
- Configuring HTTP Proxy (Release 4.1 and Prior)
- (Optional) Add a BACnet Interface (Release 3.2 to 4.1)
- (Optional) Setting up BACnet (Release 3.1)
- (Optional) Add a Remote EnOcean Interface (Beta) for SmartServer IoT (Release 4.5 and Prior)
- (Optional) Add an EnOcean Interface (Release 4.1 and Prior)
- (Optional) Add a LON Interface (Release 4.1 and Prior)
- (Optional) Switch From LON Management (Release 3.3 and Prior)
- (Optional) Add a Remote Network Interface (RNI) (Release 4.1 and Prior)
- (Optional) Add a LON IP-852 Router (Release 4.1 and Prior)
- (Optional) Add a LoRaWAN Interface (Beta) (Release 4.1 and Prior)
- (Optional) Add a Modbus RTU Interface (Release 4.1 and Prior)
- (Optional) Create a LON Interface for a Modbus Device (Release 4.1 and Prior)
- (Optional) Remotely Accessing the IAP/MQ Server (Release 4.1 and Prior)
- Using the OPC UA Server with AVEVA Edge (Release 4.1 and Prior)
- Using the OPC UA Server with GE Cimplicity (Release 4.1 and Prior)
- (Optional) Enabling the OPC UA Server (Release 4.1 and Prior)
- (Optional) Setting up the BACnet Router (Release 4.1 and Prior)
- Migrating from the LPR and MPR Routers to the SmartServer IoT (Release 4.1 and Prior)
, multiple selections available,