Rebooting Your SmartServer (Release 4.1 and Prior)

For SmartServer 4.2 and higher, see Rebooting Your SmartServer.

To perform a system reboot, follow the steps below using the SmartServer Configuration page.

  1. Open the SmartServer Configuration page.  

    The Network Configuration page appears.

  2. Click the System tab at the top of the page.

    The System Configuration tab appears.

  3. Click Reboot.

    A dialog box appears to confirm that you want to reboot the system.

  4. Click OK.

    The message The SmartServer is going to reboot NOW! appears indicating that the reboot is taking place.