/
Rebooting Your SmartServer (Release 4.1 and Prior)

Rebooting Your SmartServer (Release 4.1 and Prior)

For SmartServer 4.2 and higher, see Rebooting Your SmartServer IoT.

To perform a system reboot, follow the steps below using the SmartServer Configuration page.

  1. Open the SmartServer Configuration page.  

    The Network Configuration page appears.



  2. Click the System tab at the top of the page.

    The System Configuration tab appears.



  3. Click Reboot.



    A dialog box appears to confirm that you want to reboot the system.



  4. Click OK.

    The message The SmartServer is going to reboot NOW! appears indicating that the reboot is taking place.


Related content

Rebooting Your SmartServer IoT
Rebooting Your SmartServer IoT
More like this
Rebooting SmartServer Pi
Rebooting SmartServer Pi
More like this
Resetting the SmartServer IoT Databases
Resetting the SmartServer IoT Databases
More like this
Updating using the SmartServer CMS (Release 3.3 and Prior)
Updating using the SmartServer CMS (Release 3.3 and Prior)
More like this
KB1438 - How To Re-Image SmartServer IoT From U-Boot Prompt
KB1438 - How To Re-Image SmartServer IoT From U-Boot Prompt
More like this