The U60 DIN Network Interface is a compact network interface for LON/IP and LON twisted pair communications. Two Three models are available: one for FT (ISO/IEC 14908-2 TP/FT-10) channels and , one for TP-1250 (TP/XF-1250) channels . The U60 with standard noise immunity, and one for TP-1250 (TP/XF-1250) with high noise immunity but with installation restrictions. The U60 FT provides a USB interface for attaching to a host computer, controller, or router, or . The U60 FT and the two U60 TP-1250s provide an interface for attaching to an EnOcean SmartServer IoT. The U60 DIN Network Interface is Interfaces are packaged in a DIN 43880 2TE compliant enclosure.
You can use multiple U60 DIN Network Interfaces with hosts such as the SmartServer IoT that support multiple channels. When you attach multiple network interfaces to a host, each U60 provides an interface to a single twisted-pair channel. You can add up to four U60 FT interfaces and one U60 TP-1250 interface to a SmartServer IoT to support routing of up to five twisted-pair LON channels. To attach more than four USB interfaces to a SmartServer, add a powered USB hub to support additional USB interfaces.
| Info | ||
|---|---|---|
| ||
When using multiple U60s make sure the SmartServer is powered first before plugging in all but the first U60, and plug in each additional U60 one at a time. You only have to do this once during the initial U60 installation. You cannot install more than a total of five network interfaces (U60 or U70) and IOX modules in a single SmartServer. If you have five total, or if you have four and require a spare USB port, use a powered USB 3.0 compliant hub and plug all the U60 and U70 network interfaces into the hub. Always plug any IOX modules directly into the SmartServer and do not plug them into a hub. If you are using an IOX I/O Expansion Module, always plug the IOX into a USB port on the SmartServer and do not plug it into a USB hub. |
The U60 has The U60s have two protocol modes of operation—Layer 2 mode and Layer 5 mode that can be selected by the host application.
...
The following table lists the U60 DIN models and descriptions.
Model # | Product Name | Product Description | |
|---|---|---|---|
| |||
75060R-30 | U60 TP-1250 DIN Network Interface Module | USB interface to LON/IP TP-1250 and LON TP-1250 1.25Mbps twisted pair networks with standard noise immunity. Multiple standard noise immunity U60 TP-1250s can be installed on the same channel. | |
| 75060R-31 | U60 TP-1250 HNI DIN | Network InterfaceNetwork Interface Module | USB interface to LON/IP TP-1250 and LON TP-1250 1.25Mbps twisted pair networks with high noise immunity (HNI). Limits installation to one U60 per channel. |
75060R-40 | U60 FT DIN Network Interface Module | USB interface to LON/IP FT and LON FT free topology twisted pair networks. |
This section describes the U60 DIN hardware and contains the following topics:
...