Page Comparison

...

1. Open the SmartServer Configuration page as described in Accessing the SmartServer IoT Configuration Page. The Network tab appears as the default SmartServer Configuration page. Once the network settings are configured for the SmartServer system, then the System tab will appear as the default.
   
   
   SmartServer IoT Network tab
   
   
   SmartServer IoT System tab
   
   
2. From the Network tab, select the LAN Interface Static IP Address dropdown option and specify the address details. 
   
   
   
   
3. Click Update to save your configuration.
   
   
4. Reboot the SmartServer IoT or SmartServer Pi.
   
   
5. For SmartServer IoT, open the SmartServer Configuration page again and click the Firewall tab.
   
   
   
   
6. For SmartServer IoT, enable the port 1883 for eth0, which is required for the IzoT Net Export Tool and internal applications.
   
   
   
   
7. Click Update to save your configuration.
   
   
8. Click the LON tab.
   
   SmartServer IoT and SmartServer Pi LON Configuration pages are shown below. The examples that follow are shown using SmartServer IoT.
   
   
   SmartServer IoT LON tab
   
   
   SmartServer IoT Pi LON tab
   
   
9. Enable the SmartServer for IP-852  eth0 interface.
   
   
   SmartServer IoT LON tab
   
   
10. Click Update to save your configuration.
    
    
11. Click the CMS tab and log into the CMS.
    
    
12. From the Devices widget, switch the LON management mode to LON Independent Management Mode (IMM).

...