...
For SmartServer 4.3 Update 1 and prior, the SmartConnect CMS password for the default apollo and admin user accounts is configured in the smartserver.ini file with the SmartConnect installation. The password that is defined in the smartserver.ini file does not have any effect on the Raspberry Pi OS / SmartConnect Configuration page password. This section describes how to change SmartConnect CMS user passwords.
Since enhanced security is enabled by default for the SmartConnect, you will be prompted to change the password to meet stronger password requirements when you first log in. This section describes how to set a stronger password that meets enhanced-security password requirements. To disable enhanced security, see Configuring Security (Authentication Method).
...
Open the SmartConnect CMS and log in with your apollo or admin username.
If the Change Password dialog box appears, see the Enhancing Password Security section below.
Open the Users widget. Click the Expand button (
).
Click the user's Edit button (
).
The Edit User view appears.
Click the Password field and enter a new apollo/admin user password.
Click the Confirm Password field and enter the same new apollo/admin user password.
Click Save to store the new apollo/admin user password.
See Defining Users for more information.
...
Open the SmartConnect Configuration page.
The SmartConnect Configuration page opens. The Configuration tab that appears depends on your cache data.
Click the Accounts tab.
The Accounts view appears.
Click on your apollo user account to view and/or manage account settings.
Click Set Password.
The Set Password dialog box appears.
Enter the old password in the Old Password field, and new password in the New Password and Confirm New Password fields. The New Password and Confirm New Password entries must match.
Click Set Password to save the new password.
...