| Info |
|---|
For SmartServer 3.4 and higher, see IOX Modbus Software Setup. |
...
- Open the CMS Devices widget.
Click the Action button (
) for your iox[1-n].sys device (where iox1.sys is the first installed IOX, iox2.sys is the second, etc.) and select the View Datapoints action.
The Datapoint Browser widget appears for the selected IOX device.Note Notes: Click the Expand button (
) for a better view of this widget. 
Click the Action button (
) for the modbus_active datapoint and select the Edit Value action.
The Edit Value view appears for Modbus control.
- Edit the Modbus control (i.e., true or false) as needed.
- Click SAVE to store the Modbus control setting.
...
- Open the CMS Devices widget.
Click the Action button (
) for your iox[1-n].sys device (where iox1.sys is the first installed IOX, iox2.sys is the second, etc.) and select the View Datapoints action.
The Datapoint Browser widget appears for the selected IOX device.Note Notes: Click the Expand button (
) for a better view of this widget. Click the Action button (
) for the modbus_uart_cfg datapoint and select the Edit Value action.
The Edit Value view appears for the Modbus UART configurations.
- Edit the Modbus UART settings (i.e., baudrate, stopbit, parity) as needed.
- Click SAVE to store the Modbus UART configurations.
...