BACnet Router and Server Configuration is available with SmartServer 2.5 and higher.
| Info |
|---|
For SmartServer 3.2 to 4.1, see (Optional) Add a BACnet Interface (Release 3.2 to 4.1) For SmartServer 2.6 to 3.1, see Setting up BACnet (Release 3.1). |
You can use the SmartServer as a BACnet server, BACnet client, and a BACnet router.
...
To set up and use BACnet with the SmartServer, follow these steps:
- Enable BACnet as described on this page.
- To use the SmartServer BACnet Client to define, discover, and provision BACnet devices, see the following:
- Create a BACnet device interface (XIF) definition as described in (Optional) Creating a BACnet Device Interface (XIF) Definition.
- Create a device type definition for your device as described in Defining Device Types.
- Define datapoint properties for any datapoints to be monitored or logged as described in Setting Datapoint Properties.
- Define or discover and provision devices as described in Site Provisioning.
- To use the SmartServer BACnet Server, see (Optional) Setting up the BACnet Server.
- To use the SmartServer BACnet Router, see (Optional) Setting up the BACnet Router.
...