Versions Compared

Old Version 7

changes.mady.by.user Nina Cardillo

Saved on

compared with

New Version Current

changes.mady.by.user Nina Cardillo

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
WITH SMARTSERVER 4.1 AND PRIOR, THE FIREWALL TAB IS CALLED FEATURES.
Info

For SmartServer 4.1 and prior, see (Optional) Remotely Accessing the IAP/MQ Server (Release 4.1 and Prior).

...

To set up remote access to the IAP/MQ server, use the checkboxes on the Features Firewall Configuration page to enable eth0 and eth1 interface ports 1883 and 8883 as described below. With SmartServer 4.1 and prior, the Firewall tab is called Features. 

  1. Open the SmartServer Configuration page as described in Accessing the SmartServer IoT Configuration Page. The Network tab appears as the default SmartServer Configuration page. Once the network settings are configured for the SmartServer system, then the System tab will appear as the default.
    Image Removed
    Image Added
    SmartServer IoT Network tab
    Image Removed
    Image Added
    SmartServer IoT System tab

  2. Click the Firewall tab. 
    Image Removed

    Image Added
    SmartServer IoT Firewall tab
  3. Use the checkboxes to enable eth0 and eth1 interface ports 1883 and 8883.
    Image Removed

    Image Added
    SmartServer IoT Firewall tab

  4. Click Update to save your changes.

...