Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

With SmartServer IoT 2.7 Update 1 and higher, the Features page is used to enable IAP/MQ server settings for remote access. To enable RNIs and IP-852 and and IP-70 routing features, go to (Optional) Add a LON Interface

With SmartServer IoT releases prior to 2.7 Update 1, this page is also used to enable RNIs and IP-852 and and IP-70 routing features. 

To set up remote access to the IAP/MQ server, use the checkboxes on the Features Configuration page to enable eth0 and eth1 interface ports 1883 and 8883 as described below.

  1. Log into the SmartServer configuration UI with the username and password.



  2. Click OK to login as appropriate for your web browser.

    The Network Configuration page appears.



  3. Click the Features tab.

    The Features Configuration page appears.



  4. Use the checkboxes to enable eth0 and eth1 interface ports 1883 and 8883.



  5. Click Update to save your changes.


  • No labels