For a list of the SmartServer widgets with links to the tasks you can perform using the widgets, see SmartServer IoT CMS Widgets Index.
You can customize the information displayed by many of the CMS widgets. For widgets that display lists of resources such as device types, devices, datapoints, and datapoint properties, you can customize the list that is displayed with one or more search specifications that filter the contents of the lists to more rapidly find a particular entry in the list.
Widgets that include a search filter have a Set Filters button (
) at the top of the widget.
To set filters, perform the following steps:
- Click the Set Filters button ().
The Set Filters view appears.
Use the dropdown menus to define the search criteria. You can click the Add button (
) to further refine the search parameters. Refer to the table below for available filter settings.Filter Values Alarm State - Active
- Inactive
Block System specific Block Index System specific Block XIF Name System specific Category - Edge Device
- Segment Controller
Context System specific Context Area - Building
- Campus
- Campus Area
- Floor
- Floor Area
- Room
Datapoint System specific Datapoint Type System specific Datapoint XIF Name System specific Device System specific Device Status - Deprovisioned – devices that are not provisioned
- Down – provisioned devices that are not communicating
- Marginal – devices with marginal health status indicating that a failure was reported by the device, typically during provisioning (i.e., the device could be reached but it would not provision due to an error unrelated to communication). For drivers that implement marginal state, this device status is available with SmartServer 3.2.
- Normal – devices that are provisioned with normal health status
- Provisioned – devices that are provisioned (all health status types)
- Provisioning – devices that are being provisioned
- Suspect – provisioned devices that are not communicating
Device Type System specific Driver System specific Firmware Version System specific Group System specific Override State - Not Overridden
- Overridden
Priority - 1 (Highest), 2, 3,... 16 (Lowest)
- Normal
Profile System specific Program ID System specific Segment Controller System specific Source - Live – displays real-time data for a datapoint
- Log – displays data logs for datapoints (logging must be enabled using the Datapoint Properties widget in order to view logs)
Tag System specific Unique ID System specific XIF Name System specific Notes
Click the Add button (
) to add multiple filters to further refine your search.Click the Remove Filter (
) button next to the specific filter setting to individually remove it.Click the Remove All Filters (
) button to clear all filter settings.
The example below shows the following filter settings:- Source: Live
- Device Status: Provisioned
- Device: Tstat-01
Datapoint XIF Name: BI 1 Status
Notes
You can click Not to find items that do not match the search criteria, Exact to find items that are an exact match, and (.*) to specify custom filters.
Click Apply Filters.
The results below show the filtered display on the Datapoints widget as well as the widget display prior to filtering.
Datapoints widget prior to setting filters
Datapoints widget after setting filters