Page Comparison

To perform a SmartServer system reboot, follow perform the following steps below using :

1. Open the SmartServer Configuration page

...

1. Open as described in Accessing the SmartServer IoT Configuration pagePage.  
    The Network Configuration page appears.
   Image Removed
   Click the System tab at the top of the page.
   The System Configuration tab appears.
   Image Removedtab appears as the default SmartServer Configuration page. Once the network settings are configured for the SmartServer system, then the System tab will appear as shown in the next step.
   
   Image Added
   
   
2. Click the System tab.
   
   Image Added
   
   
3. Click Reboot.
   Image Removed
   Image Added
   
   A dialog box appears to confirm that you want to reboot the system.
   Image Removed
   Image Added
   
   
4. Click OKClick Reboot.
   
   The message The SmartServer is going to reboot NOW! appears following message appears indicating that the reboot is taking placestarting.
   
   Image Added