Page Comparison

You can customize the information displayed by many of the CMS widgets. For widgets that display lists of resources such as device types, devices, datapoints, and datapoint properties, you can customize the list that is displayed with one or more search specifications that filter the contents of the lists to more rapidly find a particular entry in the list.

Widgets that include a search filter have a Set Filters button () at the top of the widget.

...

To set filters, perform the following steps:

1. Open the SmartServer CMS.
   
   
2. Open the Datapoints widget. Click the Expand button (Image Added).
   
   Image Added
   
3. Click the Set Filters button ().
   
   The Set Filters view appears.
   
   
   
   

4. Use the dropdown menus to define the search criteria. You can click the Add button ( ) to further refine the search parameters. Refer to the table below for available filter settings.

   Filter	Values
   Alarm State	Active Inactive
   Block	System specific
   Block Index	System specific
   Block XIF Name	System specific
   Category	Edge Device Segment Controller
   Context	System specific
   Context Area	Building Campus Campus Area Floor Floor Area Room
   Datapoint	System specific
   Datapoint Type	System specific
   Datapoint XIF Name	System specific
   Device	System specific
   Device Status	Deprovisioned – devices that are not provisioned Down – provisioned devices that are not communicating Marginal – devices with marginal health status indicating that a failure was reported by the device, typically during provisioning (i.e., the device could be reached but it would not provision due to an error unrelated to communication). For drivers that implement marginal state, this device status is available with SmartServer 3.2. Normal – devices that are provisioned with normal health status Provisioned – devices that are provisioned (all health status types) Provisioning – devices that are being provisioned Suspect – provisioned devices that are not communicating
   Device Type	System specific
   Driver	System specific
   Firmware Version	System specific
   Group	System specific
   Override State	Not Overridden Overridden
   Priority	1 (Highest), 2, 3,... 16 (Lowest) Normal
   Profile	System specific
   Program ID	System specific
   Segment Controller	System specific
   Source	Live – displays real-time data for a datapoint Log – displays data logs for datapoints (logging must be enabled using the Datapoint Properties widget in order to view logs)
   Tag	System specific
   Unique ID	System specific
   XIF Name	System specific

   Note

   
   

   Click the

   Refer to the table below for specific features and functions.

   Feature	Function
   Add button (Image Modified )

   to add

   Add multiple filters to further refine your search

   .
   Click the

   Remove Filter button (Image Modified)

   button

   Button next to the specific filter setting to individually remove

   it.

   the filter

   Click the

   Remove All Filters button (Image Modified)

   button

   Button to clear all filter settings

   .
   Click 

   Not

    to find

   Find items that do not match the search criteria

   .
   Click 

   Exact

   to find

   Find items that are an exact match

   .
   Click

   (.*)

   to specify custom

   Specify custom filters

   .

   
   The example below shows the following filter settings:

   
   
   • Source: Live
   • Device Status: Provisioned
   • Device: Tstat-01 

   • Datapoint XIF Name: AV:39
     
     
     
     

5. Click Apply Filters.
   
   The results below show the Datapoints widget prior to and after set filters.

   Image RemovedImage Added
   Datapoints widget prior to setting filters (example)
   
   
   Datapoints widget after setting filters (example)