Versions Compared

Old Version 4

changes.mady.by.user Nina Cardillo

Saved on

compared with

New Version 5

changes.mady.by.user Nina Cardillo

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Local EnOcean interface is supported with SmartServer 4.0 and higher.
Info

For SmartServer 4.1 and prior, see (Optional) Add an EnOcean Interface (Release 4.1 and Prior).

...

To set up and use local EnOcean interface with the SmartServer, follow these steps:

  1. Add an EnOcean network interface as described on this page.

  2. Enable EnOcean on your SmartServer as described on this page. With SmartServer 4.2 and higher, the EnOcean driver is enabled by default for SmartServer IoT and disabled for SmartServer Pi.
     
  3. Download and modify, or create an EnOcean device interface (XIF) and device type definition as described on this page.

  4. Define datapoint properties for any datapoints to be monitored or logged as described in Setting Datapoint Properties.

  5. Define or discover, and provision devices as described in Site Provisioning.  See the following sections on this page for step-by-step examples:
  6. Optionally, provide a BACnet interface for your EnOcean device; see Setting up the BACnet Server.  This enables you to use a BACnet workstation with your EnOcean device.

...