Page Comparison

...

To manually change the SmartServer's location, perform the following steps:

1. Open the SmartServer CMS.
   
   
2. Open the Devices widget, SEGMENT CONTROLLER tab.
   
   
   
   
3. Click the SmartServer's Action button () and select the Edit action.
   
   
   
   The SmartServer settings view appears.
   
   
   
   This view allows you to set or edit the following SmartServer fields:
   
   1. Name – (required) name of the SmartServer
   2. Context – (optional) context that the SmartServer is assigned to
   3. Latitude / Longitude (optional) – latitude / longitude location of the SmartServer
   4. Tags – (optional) semicolon-separated set of <key>=<value> pairs
   5. Description – (optiona) description 
   6. Timezone – (required) timezone of the SmartServer
      
      
4. Set the SmartServer location in one of the following ways:
   1. Assign or change the context.
   2. Set the latitude / longitude in the appropriate fields.

   3. Click the Set Location button (). The Set Location view appears. 

      1. Use the + button to zoom in and the - button to zoom out on the map, and set the location.

      2. Click OK.
         
         

         
         
         The SmartServer settings view appears with the updated location.
         
         
         
         
5. To set the timezone, enter the region in the provided field and then select the timezone from the provided list.
   
   
6. Click Save.

...