...
...
...
SmartConnect is available with SmartServer 4.2 and higher.
You can open the SmartServer Pi SmartConnect CMS using a web browser or using the SmartServer Pi SmartConnect Configuration page. This section describes how to open the SmartServer Pi SmartConnect CMS using these methods and consists of the following:
| Table of Contents | ||
|---|---|---|
|
Opening the CMS Using the Web Browser
To open the SmartServer Pi SmartConnect CMS using a web browser, perform the following steps:
Open a web browser.
Enter the following in the URL:
Code Block https://<IP address>/cms or <hostname>/cms
...
Example: IP address
Code Block /https://192.168.4.146/cms/
...
Example: hostname
Code Block https://smartserver-hsbcw69/cmsThe CMS login page appears.
...
Enter your apollo login credentials
...
. For SmartServer 4.4 and higher, the default CMS username and password is apollo / apollo. For SmartServer 4.3. Update 1 and prior, login credentials are username apollo and the password that is set in the smartserver.ini configuration file.
...
Click LOGIN.
The
...
SmartConnect CMS appears.
If a dialog box appears prompting you to change your password, then go to Changing the
...
...
See SmartServer User's Guide for more information.
Opening the CMS Using the Configuration Page
To open the SmartServer Pi SmartConnect CMS using the Configuration page, perform the following steps:
...
...
SmartConnect Configuration page appears. The view that appears depends on your cache data.
...
Click the CMS tab.
...
The CMS login page appears.
...
Enter your apollo login credentials. Login credentials are username apollo and the password that is set in the smartserver.ini configuration file.
...
Click LOGIN.
The
...
SmartConnect CMS appears.
If a dialog box appears prompting you to change your password, then go to Changing the
...
...
See SmartServer User's Guide for more information.
...