Page Comparison

The HTTP Proxy feature is available with SmartServer 4.0 and higher.

...

1. Open the SmartServer Configuration page as described in Accessing the SmartServer IoT Configuration Page. The Network tab appears as the default SmartServer Configuration page. Once the network settings are configured for the SmartServer system, then the System tab will appear.
   
   
   SmartServer IoT Network tab
   
   
   SmartServer IoT System tab
   
   
   For SmartServer Pi, open the SmartServer Configuration page as described in Accessing the SmartServer Pi Configuration Page. The Configuration tab view that appears depends on your cache data. As needed, click the SmartServer IoT tab. The System tab (top) will appear as the default as shown below.
   
   
   SmartServer Pi System tab
   
   
2. Enable the Enable HTTP Proxy option.
   
   
   SmartServer IoT example
   
   
3. Set the HTTP proxy settings, including:
   
   • HTTP proxy IP Address or Hostname (required)
   • HTTP proxy Port (required)
   • Username and Password for authentication (optional). Click the Show Password button (Image Modified) to reveal the disguised password.
   • Upload the certificate file from your PC using the Browse option. (optional)
   • Enable the Include FTP option (optional)
     
     
4. Click Update to save the HTTP proxy settings.
   
   
5. Reboot the SmartServer IoT or SmartServer Pi.

...

To configure the HTTP proxy settings using the CMS Settings widget, follow these steps:

1. Open the SmartServer IoT CMS.
   
   
2. Open the CMS Settings widget.
   
   
   
   
3. Click HTTP Proxy.
   
   
   
   The HTTP Proxy view appears.
   
   
   
   
4. Set the HTTP proxy options as needed, including:
   
   •  – set to on to enable HTTP proxy; enter Host and Port information.
   •   – set to on if the authentication is required; enter User and Password information. 
     Click the Show Password button (Image Modified) to display the hidden password.
     
     
5. Click Save to save HTTP proxy settings.
   

...