Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
The ability to set warning limits is available with SmartServer 3.5 and higher.

To help ensure optimal system performance, you can set event per second (EPS) and annual log size limits so that warning / error messages will be displayed when datapoints exceed a specified number. You can also configure whether or not the EPS and/or annual log size notifications are displayed.

To set warning limits, perform the following steps:

  1. Open the Settings widget.

    Image Modified

  2. Click Warning Limits Settings.

    Image Modified

    The Warning Limits Settings view appears.
    Image Removed
    Local CMS
    Image Removed
    Remote CMS

    Set the Warning and Error fields, and the Show notification switches as appropriate for your system.

    Note

    For local CMS, default values should not be changed.

    For remote CMS, warning limits are set per-SmartServer EPS. If per-SmartServer limits are exceeded for some segment controllers, then badges will appear in the Devices widget → SEGMENT CONTROLLERS tab → EPS column.

    An example warning notification is shown below.

    Image Removed
The ability to set warning limits is available with SmartServer 3.5 and higher.

...

  1. Open the Settings widget.
    Image Removed
    Click Warning Limits Settings.
    Image Removed

    The Warning Limits Settings view appears.

    Image Modified
    Local CMS

    Image Modified
    Remote CMS

  2. Set the Warning and Error fields, and the Show notification switches as appropriate for your system.

    Note

    For local CMS, default values should not be changed.

    For remote CMS, warning limits are set per-SmartServer EPS. If per-SmartServer limits are exceeded for some segment controllers, then badges will appear in the Devices widget → SEGMENT CONTROLLERS tab → EPS column.

    An example warning notification is shown below.


...