Page Comparison

• (Optional) Secure Your SmartServer for configuring System Configuration page settings
  
  
• (Optional) Switch Off From LON Management for switching the LON Network Management Mode
  
  
• (Optional) Secure Your SmartServer, Managing Passwords → Changing the System Password for changing both the apollo system and CMS apollo user passwords
  
  
• (Optional) Secure Your SmartServer, Managing Passwords → Changing User Passwords for changing only the CMS apollo user password
  
  
• Reboot Your SmartServer
  
  
• Reset the SmartServer to Factory Defaults
  
  
• Update the SmartServer Software
  
  
• (Optional) Secure Your SmartServer, Managing Passwords → Restoring the Factory System Password with the Connect Button for enabling/disabling password reset using the Connect button
  
  
• Enhance Security/wiki/spaces/TEMP/pages/209397555 for enabling/disabling enhanced security features
  
  
• Enhance Security/wiki/spaces/TEMP/pages/209397555 for signed certificates
  
  
• Enhance Security/wiki/spaces/TEMP/pages/209397555 for enabling 802.1x mutual authentication for eth0 or eth1
  
  
• SmartServer IoT Getting Started for Remote CMS (Beta) configuration
  
  • Local CMS vs. Remote CMS
  • Set Up the Remote CMS Host Computer
  • Install and Start the Remote CMS
  • Enable Remote CMS for Each SmartServer
  • Connect to the Remote CMS
    
    
• Download Logs from the SmartServer
  The ability to download logs using the Logs button is available with SmartServer 4.0 and higher.
  
  
• Configuring HTTP Proxy 
  HTTP proxy settings are available with SmartServer 4.0 and higher.

• Configure Your SmartServer
  
  
• Reboot Your SmartServer

(Optional) Add a LON Interface

(Optional) Set up BACnetAdd a BACnet Interface

(Optional) Set up the IAP/MQ Server

(Optional) Add a Modbus RTU Interface

Open the SmartServer CMS/wiki/spaces/TEMP/pages/44041710