This section consists of the following topics:
You can use the U70 PL LEDs to get an overview of the U70 PL status and operation. The following figure and table display and describes these LEDs.
On (blue) when powered.
Off during normal operation; flashing (alternating yellow/off) when the host attached to the U70 is connecting to another device.
Flashes green when the U70 is transmitting on the PL channel.
Flashes green when the U70 receives data from the PL channel.
Using the Buttons
You can use the IOX button to connect the host attached to the U70 to other devices. The following table describes this button.
Press this button to initiate connection for wireless and wired devices.