Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

This section consists of the following topics:

Using the LEDs

You can use the U70 PL LEDs to get an overview of the U70 PL status and operation. The following figure and table display and describes these LEDs.

Icon

Name               

Description

Power

On (blue) when powered.

Connect

Off during normal operation; flashing (alternating yellow/off) when the host attached to the U70 is connecting to another device.

Transmit

Flashes green when the U70 is transmitting on the PL channel.

Receive

Flashes green when the U70 receives data from the PL channel.

Using the Buttons

You can use the IOX button to connect the host attached to the U70 to other devices. The following table describes this button.

Icon

Name               

Description

Connect

Press this button to initiate connection for wireless and wired devices.


  • No labels