Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

For a list of the SmartServer widgets with links to the tasks you can perform using the widgets, see SmartServer IoT CMS Widgets Index.

You can customize the information displayed by many of the CMS widgets. For widgets that display lists of resources such as device types, devices, datapoints, and datapoint properties, you can customize the list that is displayed with one or more search specifications that filter the contents of the lists to more rapidly find a particular entry in the list.

Widgets that include a search filter have a Set Filters button () at the top of the widget.

This section demonstrates the Datapoints widget Set Filter feature as an example. The Datapoints widget is available with SmartServer 2.5 and higher. Prior to SmartServer 3.4, this widget was called Datapoint Browser. 

To set filters, perform the following steps:

  1. Click the Set Filters button ().

    The Set Filters view appears.



  2. Use the dropdown menus to define the search criteria. You can click the Add button ( ) to further refine the search parameters. Refer to the table below for available filter settings.

    FilterValues
    Alarm State
    • Active
    • Inactive
    BlockSystem specific
    Block IndexSystem specific
    Block XIF NameSystem specific
    Category
    • Edge Device
    • Segment Controller
    ContextSystem specific
    Context Area
    • Building
    • Campus
    • Campus Area
    • Floor
    • Floor Area
    • Room
    DatapointSystem specific
    Datapoint TypeSystem specific
    Datapoint XIF NameSystem specific
    DeviceSystem specific
    Device Status
    • Deprovisioned – devices that are not provisioned
    • Down – provisioned devices that are not communicating
    • Marginal – devices with marginal health status indicating that a failure was reported by the device, typically during provisioning (i.e., the device could be reached but it would not provision due to an error unrelated to communication). For drivers that implement marginal state, this device status is available with SmartServer 3.2.
    • Normal – devices that are provisioned with normal health status
    • Provisioned – devices that are provisioned (all health status types)
    • Provisioning – devices that are being provisioned
    • Suspect – provisioned devices that are not communicating
    Device TypeSystem specific
    DriverSystem specific
    Firmware VersionSystem specific
    GroupSystem specific
    Override State
    • Not Overridden
    • Overridden
    Priority
    • 1 (Highest), 2, 3,... 16 (Lowest)
    • Normal
    ProfileSystem specific
    Program IDSystem specific
    Segment ControllerSystem specific
    Source
    • Live – displays real-time data for a datapoint
    • Log – displays data logs for datapoints (logging must be enabled using the Datapoint Properties widget in order to view logs)
    TagSystem specific
    Unique IDSystem specific
    XIF NameSystem specific

    Notes

    Click the Add button ( ) to add multiple filters to further refine your search.

    Click the Remove Filter () button next to the specific filter setting to individually remove it.

    Click the Remove All Filters () button to clear all filter settings.


    The example below shows the following filter settings:

    • Source: Live
    • Device Status: Provisioned
    • Device: Tstat-01 
    • Datapoint XIF Name: BI 1 Status



      Notes

      You can click Not to find items that do not match the search criteria, Exact to find items that are an exact match, and (.*) to specify custom filters.

  3. Click Apply Filters.

    The results below show the filtered display on the Datapoints widget as well as the widget display prior to filtering.


    Datapoints widget prior to setting filters


    Datapoints widget after setting filters


  • No labels