Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

For SmartServer 4.1 and prior, see(Optional) Remotely Accessing the IAP/MQ Server (Release 4.1 and Prior).


With SmartServer IoT 2.7 Update 1 and higher, the Features page is used to enable IAP/MQ server settings for remote access. To enable RNIs and IP-852 and and IP-70 routing features, go to (Optional) Add a LON Interface. 

With SmartServer IoT releases prior to 2.7 Update 1, this page is also used to enable RNIs and IP-852 and and IP-70 routing features. 

To set up remote access to the IAP/MQ server, use the checkboxes on the Features Configuration page to enable eth0 and eth1 interface ports 1883 and 8883 as described below.

  1. Open the SmartServer Configuration page as described in Accessing the SmartServer Configuration Page. The Network tab appears as the default SmartServer Configuration page. Once the network settings are configured for the SmartServer system, then the System tab will appear as the default.


    Network tab


    System tab

  2. Click the Firewall tab. 



  3. Use the checkboxes to enable eth0 and eth1 interface ports 1883 and 8883.



  4. Click Update to save your changes.


  • No labels