Page Comparison

You can customize the information displayed by many of the CMS widgets. For widgets that display lists of resources such as device types, devices, datapoints, and datapoint properties, you can customize the list that is displayed with one or more search specifications that filter the contents of the lists to more rapidly find a particular entry in the list.

Widgets that include a search filter have a Set Filters button () at the top of the widget.

...

To set filters, perform the following steps:

1. Open the SmartServer CMS.
   
   
2. Open the Datapoints widget. Click the Expand button (Image Added).
   
   Image Added
   
   
3. Click the Set Filters button ().
   
   The Set Filters view appears.
   Image Removed
   Image Added
   
   

4. Use the dropdown menus to define the search criteria. You can click Click the Add Filters button ( ) to further refine the search parameters. Refer  
   
   Refer to the table below for available filter settings.

   Filter	Values
   Alarm State	Active Inactive
   Block	System specific
   Block Index	System specific
   Block XIF Name	System specific
   Category	Edge Device Segment Controller
   Context	System specific
   Context Area	Building Campus Campus Area Floor Floor Area Room
   Datapoint	System specific
   Datapoint Type	System specific
   Datapoint XIF Name	System specific
   Device	System specific
   Device Status	Deprovisioned – devices that are not provisioned Down – provisioned devices that are not communicating Marginal – devices with marginal health status indicating that a failure was reported by the device, typically during provisioning (i.e., the device could be reached but it would not provision due to an error unrelated to communication). For drivers that implement marginal state, this device status is available with SmartServer 3.2. Normal – devices that are provisioned with normal health status Provisioned – devices that are provisioned (all health status types) Provisioning – devices that are being provisioned Suspect – provisioned devices that are not communicating
   Device Type	System specific
   Driver	System specific
   Firmware Version	System specific
   Group	System specific
   Override State	Not Overridden Overridden
   Priority	1 (Highest), 2, 3,... 16 (Lowest) Normal
   Profile	System specific
   Program ID	System specific
   Segment Controller	System specific
   Source	Live – displays real-time data for a datapoint Log – displays data logs for datapoints (logging must be enabled using the Datapoint Properties widget in order to view logs)
   Tag	System specific
   Unique ID	System specific
   XIF Name	System specific

   Note

   title	Notes

   
   

   Click the Add

   Refer to the table below for specific features and functions.

   
   

   
   

   
   

   Feature	Function
   Add FIlter button (Image Modified )

   to add multiple filters to further refine your search

   Adds filters.

   Click the

   Remove Filter button (Image Modified)

   button next to the

   Removes a specific filter

   setting to individually remove it

   .

   Click the

   Remove All Filters button (Image Modified)

   button to clear

   	Clears all filter settings.
   Not	Finds items that do not match the search criteria.
   Exact	Finds items that are an exact match.
   (.*)	Specifies custom filters.

   
   The example below shows the following filter settings:

   
   
   • Source: Live
   • Device Status: Provisioned
   • Device: Tstat-01 

   • Datapoint XIF Name: BI 1 Status
     Image Removed
     

     Note

     title	Notes

     You can click Not to find items that do not match the search criteria, Exact to find items that are an exact match, and (.*) to specify custom filters.

     AV:39
     
     Image Added
     
     

5. Click Apply Filters.
   
   The results below show the filtered display on the Datapoints widget as well as the widget display prior to filteringand after set filters.

   Image RemovedImage Added
   Datapoints widget prior to setting filters (example)
   Image Removed
   Image Added
   Datapoints widget after setting filters (example)