Customize the CMS Widgets using Filters

For a list of the SmartServer widgets with links to the tasks you can perform using the widgets, see SmartServer CMS Widgets Index.

You can customize the information displayed by many of the CMS widgets. For widgets that display lists of resources such as device types, devices, datapoints, and datapoint properties, you can customize the list that is displayed with one or more search specifications that filter the contents of the lists to more rapidly find a particular entry in the list.

Widgets that include a search filter have a Set Filters button () at the top of the widget.

This section demonstrates the Datapoints widget Set Filter feature as an example. The Datapoints widget is available with SmartServer 2.5 and higher. Prior to SmartServer 3.4, this widget was called Datapoint Browser. 

To set filters, perform the following steps:

  1. Open the SmartServer CMS.

  2. Open the Datapoints widget. Click the Expand button ().



  3. Click the Set Filters button ().

    The Set Filters view appears.



  4. Use the dropdown menus to define the search criteria. Click the Add Filters button ( ) to further refine the search parameters. 

    Refer to the table below for available filter settings.

    FilterValues
    Alarm State
    • Active
    • Inactive
    BlockSystem specific
    Block IndexSystem specific
    Block XIF NameSystem specific
    Category
    • Edge Device
    • Segment Controller
    ContextSystem specific
    Context Area
    • Building
    • Campus
    • Campus Area
    • Floor
    • Floor Area
    • Room
    DatapointSystem specific
    Datapoint TypeSystem specific
    Datapoint XIF NameSystem specific
    DeviceSystem specific
    Device Status
    • Deprovisioned – devices that are not provisioned
    • Down – provisioned devices that are not communicating
    • Marginal – devices with marginal health status indicating that a failure was reported by the device, typically during provisioning (i.e., the device could be reached but it would not provision due to an error unrelated to communication). For drivers that implement marginal state, this device status is available with SmartServer 3.2.
    • Normal – devices that are provisioned with normal health status
    • Provisioned – devices that are provisioned (all health status types)
    • Provisioning – devices that are being provisioned
    • Suspect – provisioned devices that are not communicating
    Device TypeSystem specific
    DriverSystem specific
    Firmware VersionSystem specific
    GroupSystem specific
    Override State
    • Not Overridden
    • Overridden
    Priority
    • 1 (Highest), 2, 3,... 16 (Lowest)
    • Normal
    ProfileSystem specific
    Program IDSystem specific
    Segment ControllerSystem specific
    Source
    • Live – displays real-time data for a datapoint
    • Log – displays data logs for datapoints (logging must be enabled using the Datapoint Properties widget in order to view logs)
    TagSystem specific
    Unique IDSystem specific
    XIF NameSystem specific


    Refer to the table below for specific features and functions.


    FeatureFunction

    Add FIlter button ( )

    Adds filters.

    Remove Filter button ()

    Removes a specific filter.

    Remove All Filters button (

    Clears all filter settings.
    NotFinds items that do not match the search criteria.
    ExactFinds items that are an exact match.
    (.*)Specifies custom filters.


    The example below shows the following filter settings:


    • Source: Live
    • Device Status: Provisioned
    • Device: Tstat-01 
    • Datapoint XIF Name: AV:39



  5. Click Apply Filters.

    The results below show the Datapoints widget prior to and after set filters.


    Datapoints widget prior to setting filters (example)


    Datapoints widget after setting filters (example)