Versions Compared

Old Version 2

changes.mady.by.user Rich Blomseth

Saved on

compared with

New Version Current

changes.mady.by.user Nina Cardillo

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

To replace an i.LON 700 configured as a self-installed LON repeater with a SmartServer, follow these steps:

  1. Change the SmartServer IP address settings on the Configuration page Network tab (see Configure Your SmartServer) for the Ethernet LAN or WAN ports you are using to Static IP Address or DHCP.

  2. Verify the SmartServer IP address settings are not configured for Startup Mode.  You can use startup for initial network setup, but it is not suitable for operational use.

  3. Verify IP-852 is enabled as described on the Adding a LON Interface page.

  4. Reboot the SmartServer.

  5. Add the SmartServer to the IP-852 configuration server.  If you are using the EnOcean IP-852 Configuration Server, when all the devices are green, right-click the channel and click Update Channel.

...