...
To replace an i.LON 700 configured as a self-installed LON repeater with a SmartServer, follow these steps:
Change the SmartServer IP address settings on the Configuration
...
page Network tab (see Configure Your SmartServer) for the Ethernet LAN or WAN ports you are using to Static IP Address or DHCP.
Verify the SmartServer IP address settings are not configured for Startup Mode. You can use startup for initial network setup, but it is not suitable for operational use.
Verify IP-852 is enabled as described on the Adding a LON Interface page.
Reboot the SmartServer.
Add the SmartServer to the IP-852 configuration server. If you are using the EnOcean IP-852 Configuration Server,
...
when all the devices are green, right-click the channel and click Update Channel.
Replacing an i.LON 700 Configured LON Router with a SmartServer
...
To replace an i.LON 700 configured as a LON router with an external LON network integration tool with a SmartServer, follow these steps:
Change the SmartServer IP address settings on the Configuration
...
page Network tab (see Configure Your SmartServer) for the Ethernet LAN or WAN ports you are using to Static IP Address or DHCP.
Verify the SmartServer IP address settings are not configured for Startup Mode. You can use startup for initial network setup, but it is not suitable for operational use.
Disable the LON/IP Class A Network Override Standard checkbox on the Configuration page LON tab, as described on Adding a LON Interface.
Reboot the SmartServer.
Switch the SmartServer to LON Independent Management Mode (IMM) using the CMS Devices widget.
Verify IP-852 is enabled as described on the Adding a LON Interface page.
Add the SmartServer to the IP-852 configuration server. If you are using the EnOcean IP-852 Configuration Server,
...
when all the devices are green, right-click the channel and click Update Channel.
Use your network integration tool to replace the i.LON 700 router with your SmartServer router.
When prompted by your network integration tool, press the IP-852 service button on the Configuration page LON tab.