Page Comparison

...

The SmartServer Configuration page provides the ability to configure the SmartServer network and system settings, as well as LON (not available for SmartServer Pi), BACnet, OPC UA (not supported for with SmartServer Pi 4.2 and higher, OPC UA is beta), RS-485, Modbus, EnOcean, LoRaWAN, and Firewall (IAP/MQ server) settings.

...

1. For SmartServer IoT, open the SmartServer Configuration page as described in Accessing the SmartServer IoT Configuration Page. The Network tab appears as the default SmartServer Configuration page. Once the network settings are configured for the SmartServer system, then the System tab will appear as the default as shown in the next step.
   
   For SmartServer Pi, open the SmartServer Configuration page as described in Accessing the SmartServer Pi Configuration Page. The Configuration tab that appears depends on your cache data. As needed, click the SmartServer IoT tab. The System tab (top) will appear as the default as shown in the next step.
   
   
   
   
2. Click the System tab. The System Configuration page appears with the system information displayed at the top of the page. The system information includes the following:

...