Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

...


Info

For SmartServer 4.1 and prior, see SmartServer IoT Configuration Page Index (Release 4.1 and Prior).

The table below provides an index to the tabs for the SmartServer Configuration pages page and provides links for the tasks that you can perform from the Configuration pagespage

Info
titleSee also

Configuration Page Tour video that describes the tabs of the Configuration pages for the SmartServer IoT. 

SmartServer CMS Overview for more information about the key parts and buttons that appear on the SmartServer CMS. 

SmartServer IoT CMS Widgets Index for a description of the CMS widgets and links for tasks that are associated with these widgets.

...

Image RemovedFeatures Set up the IAP/MQ ServerImage RemovedCMScms
Configuration PageTasks                                                                                                                            Configuration Page  Preview

System

(Optional) Secure Your SmartServer for configuring System Configuration page settings

(Optional) Switch From LON Management for switching the LON Network Management Mode

(Optional) Secure Your SmartServer, Managing Passwords → Changing the System Password for changing both the apollo system and CMS apollo user passwords

(Optional) Secure Your SmartServerManaging Passwords → Changing User Passwords for changing only the CMS apollo user password

Reboot Your SmartServer

Reset the SmartServer to Factory Defaults

Update the SmartServer Software

(Optional) Secure Your SmartServerManaging Passwords → Restoring the Factory System Password with the Connect Button for enabling/disabling password reset using the Connect button

/wiki/spaces/TEMP/pages/

209397555

1484465 for enabling/disabling enhanced security features

/wiki/spaces/TEMP/pages/

209397555

1484465 for signed certificates

/wiki/spaces/TEMP/pages/

209397555

1484465 for enabling 802.1x mutual authentication for eth0 or eth1

SmartServer IoT Getting Started for Remote CMS (Beta) configuration

Download Logs from the SmartServer
The ability to download logs using the Logs button is available with SmartServer 4.0 and higher.

Configuring HTTP Proxy 
HTTP proxy settings are available with SmartServer 4.0 and higher.

Image RemovedImage Added

NetworkConfigure Your SmartServer

Configuring the SmartServer IP Address and Hostname

Reboot Your SmartServer

Image RemovedImage Added

LON

(Optional) Add a LON Interface

/wiki/spaces/TEMP/pages/1481252

Image Added

BACnet

(Optional) Add a BACnet Interface

Image RemovedImage Added

OPC UA(Optional) Set up the OPC UA Server

Image RemovedImage Added

Modbus(Optional) Add a Modbus Interface (TCP/RTU)

Image Added

RS-485(Optional) Add a Modbus RTU Interface

Image Removed

Anchor
cmsImage Added
EnOcean(Optional) Add an EnOcean Interface

Image Added

LoRaWAN(Optional) Add a LoRaWAN Interface

Image Added

Firewall

With SmartServer 4.1 and prior, this tab is called Features.

/wiki/spaces/TEMP/pages/1475599


Image Added

CMS

/wiki/spaces/TEMP/pages/440417101476055


Image RemovedImage Added

HelpUse this Documentation

Image RemovedImage Added