Page Comparison

(Optional) Secure Your SmartServer for configuring System Configuration page settings

(Optional) Switch From LON Management for switching the LON Network Management Mode

(Optional) Secure Your SmartServer, Managing Passwords → Changing the System Password for changing both the apollo system and CMS apollo user passwords

(Optional) Secure Your SmartServer, Managing Passwords → Changing User Passwords for changing only the CMS apollo user password

Reboot Your SmartServer

Reset the SmartServer to Factory Defaults

Update the SmartServer Software

(Optional) Secure Your SmartServer, Managing Passwords → Restoring the Factory System Password with the Connect Button for enabling/disabling password reset using the Connect button

Enhance Security for enabling/disabling enhanced security features

Enhance Security for signed certificates

Enhance Security for enabling 802.1x mutual authentication for eth0 or eth1

SmartServer IoT Getting Started for Remote CMS (Beta) configuration

• Local CMS vs. Remote CMS
• Set Up the Remote CMS Host Computer
• Install and Start the Remote CMS
• Enable Remote CMS for Each SmartServer
• Connect to the Remote CMS
  
  

Download Logs from the SmartServer
The ability to download logs using the Logs button is available with SmartServer 4.0 and higher.

Configuring HTTP Proxy 
HTTP proxy settings are available with SmartServer 4.0 and higher.

Configuring the SmartServer IP Address and Hostname

Reboot Your SmartServer

(Optional) Add a LON Interface

(Optional) Add a BACnet Interface

Firewall

With SmartServer 4.1 and prior, this tab is called Features.

/wiki/spaces/TEMP/pages/1475599

Open the SmartServer CMS