SmartServer Pi is available with SmartServer 4.2 and higher.

You can open the SmartServer Pi CMS using a web browser or using the SmartServer Pi Configuration page. This section describes how to open the SmartServer Pi CMS using these methods and consists of the following:

Opening the CMS Using the Web Browser

To open the SmartServer Pi CMS using a web browser, perform the following steps:

1. Open a web browser.
   
   

2. Enter the following in the URL:

   https://<IP address>/cms or <hostname>/cms

   Example: IP address

   /https://192.168.4.146/cms/

   Example: hostname

   https://smartserver-hsbcw69/cms

   The CMS login page appears.
   
   
   
   

3. Enter your apollo login credentials. Login credentials are username apollo and the password that is set in the smartserver.ini configuration file.
   
   
   
   

4. Click LOGIN.
   
   The SmartServer Pi CMS appears. 
   
   If a dialog box appears prompting you to change your password, then go to Changing the SmartServer Pi User Passwords.
   
   

See SmartServer User's Guide for more information.

Opening the CMS Using the Configuration Page

To open the SmartServer Pi CMS using the Configuration page, perform the following steps:

1. Open the SmartServer Pi Configuration page.
   
   The SmartServer Pi Configuration page appears. The view that appears depends on your cache data.
   
   
   
   
2. Click the CMS tab.
   
   
   
   The CMS login page appears.
   
   
   
   

3. Enter your apollo login credentials. Login credentials are username apollo and the password that is set in the smartserver.ini configuration file.
   
   
   
   

4. Click LOGIN.
   
   The SmartServer Pi CMS appears. 
   
   If a dialog box appears prompting you to change your password, then go to Changing the SmartServer Pi User Passwords.

See SmartServer User's Guide for more information.