/
Resetting SmartConnect to Factory Defaults

Resetting SmartConnect to Factory Defaults

SmartConnect is available with SmartServer 4.2 and higher.

You can reset SmartConnect to the factory default configuration, which includes resetting databases, as described below:

  1. Open a terminal window connection to the server.

  2. Enter the commands shown below to remove SmartConnect from your server.

    $ sudo apt-get remove --purge smartserver-software $ sudo rm -rf /var/smartserver

     

  3. Follow the installation procedure using the .tar.gz package for your SmartConnect software version. See Installing SmartConnect. You do not need to recreate the /etc/smartserver directory or modify the smartserver.ini file.

  4. Once the installation is complete, use the Manage Licenses dialog to manage your customer account and activate licenses. Re-enter the Customer ID for the SmartConnect licenses to re-appear. The Manage Licenses dialog is accessible on system startup as well as from the SmartServer CMS. See Activating Licenses Online Using the SmartServer CMS for more information.

Related content

Updating or Re-imaging SmartConnect
Updating or Re-imaging SmartConnect
More like this
Resetting the SmartServer to Factory Defaults (Release 4.1 and Prior)
Resetting the SmartServer to Factory Defaults (Release 4.1 and Prior)
More like this
Resetting the SmartServer IoT Databases
Resetting the SmartServer IoT Databases
More like this
Resetting the SmartServer IoT to Factory Defaults
Resetting the SmartServer IoT to Factory Defaults
More like this