Page Comparison

SmartServer Pi is available with SmartServer 4.2 and higher.

You can access the SmartServer Pi Configuration page to set up and manage your SmartServer Pi as described in the following sections:

...

1. Connect to your SmartServer Pi using a web browser by entering the IP address or the hostname in the URL as follows:

   Code Block
   https://<IP address> or <hostname>

   
   

   Code Block
   title Example: IP address
   https://192.168.4.146

   
   

   Code Block
   title Example: hostname with a local DNS server
   https://smartserver-hsbcw69

   
   

   Code Block
   title Example: hostname without a local DNS server; using mDNS
   https://smartserver-hsbcw69.local

   
   The login page appears prompting you to enter your user name and password.
   
   
   
   

2. Enter your user name and password in the appropriate fields. Login credentials for the SmartServer Pi Configuration page are the same as your Raspberry Pi login credentials. Login credentials can be configured in Accounts settings. 
   
   
   
   

3. Click Log in.
   
   The SmartServer Pi Configuration page appears.
   Image Removed
   Image Added
   
   The SmartServer Pi Configuration page is described in the section that follows.

...

The SmartServer Pi Configuration page displays system information and provides tabs at the top of the page for setting up device interfaces including including LON (LON is supported for SmartServer Pi 4.3 and higher, with the exception of LON PL), BACnet, OPC UA (Beta), Modbus, RS-485, EnOcean, and LoRaWAN. It also provides tabs for opening the SmartServer Pi CMS and accessing help. Do not use the SmartServer Pi Configuration page for LoRaWAN setup; see (Optional) Add a LoRaWAN Interface for SmartServer Pi.

...

Image Added

The left-side Configuration tabs provide the system management operations listed below. SmartServer Pi configuration is mainly accomplished using the SmartServer IoT tab. The other tabs are used to configure host settings that are outside the scope of SmartServer Pi.

• SmartServer IoT – provides tabs across the top of the Configuration page for SmartServer Pi configuration: System, LON, BACnet, OPC UA, Modbus, RS-485, EnOcean, LoRaWAN, CMS, and Help
• Overview 
• Logs
• Storage
• Networking – provides SmartServer Pi network configuration
• Accounts – provides SmartServer Pi user account configuration
• Services
• Applications
•  Software/Updates
• Terminal – opens a SmartServer Pi terminal window connection

Image RemovedImage Added

For System Information, see Viewing System Information.

Image RemovedImage Added

For Remote CMS, see Remote CMS Getting Started. 

Image RemovedImage Added

For HTTP Proxy, see Configuring Authentication Method.

...

Image Added

For information about adding a LON interface, see (Optional) Add a LON Interface. LON is not available with SmartServer Pi 4.2; LON PL is not supported with SmartServer Pi 4.3 and higher.

For information about adding a BACnet interface, see (Optional) Add a BACnet Interface.

For information about adding an EnOcean interface, see (Optional) Add an a Local EnOcean Interface.

For information about adding a LoRaWAN interface, see (Optional) Add a LoRaWAN Interface for SmartServer 4.3 and higher and (Optional) Add an LoRaWAN Interface (Release 4.2) for SmartServer Pi 4.2.

For information about adding a Modbus interface, see (Optional) Add a Modbus Interface.

...