Rebooting SmartConnect

SmartConnect is available with SmartServer 4.2 and higher.

To reboot your SmartConnect, perform the following steps:

1. Open the SmartConnect Configuration page.
   
   The SmartConnect Configuration page appears. The left-side Configuration tab that appears depends on your cache data.
   
   

   Open

   

    

2. Click the Overview tab (left-side).
   
   

   Open

   

    

3. Select Reboot from the pulldown menu.
   
   

   Open

   

    

4. A dialog box appears allowing you to enter a notification message to users who are logged into the system as well as to set a reboot delay.
   
   

   Open

   

    

5. Set the user message and delay as needed, and then click Reboot.