SmartServer IoT Configuration Page Index

For SmartServer 4.1 and prior, see SmartServer IoT Configuration Page Index (Release 4.1 and Prior).

The table below provides an index to the tabs for the SmartServer Configuration page and provides links for the tasks that you can perform from the Configuration page.

See also

Configuration Page Tour video that describes the tabs of the Configuration pages for the SmartServer IoT.

SmartServer CMS Overview for more information about the key parts and buttons that appear on the SmartServer CMS.

SmartServer CMS Widgets Index for a description of the CMS widgets and links for tasks that are associated with these widgets.

Configuration Page	Tasks	Configuration Page Preview
System	(Optional) Secure Your SmartServer for configuring System Configuration page settings (Optional) Switch From LON Management for switching the LON Network Management Mode (Optional) Secure Your SmartServer, Managing Passwords → Changing the System Password for changing both the apollo system and CMS apollo user passwords (Optional) Secure Your SmartServer, Managing Passwords → Changing User Passwords for changing only the CMS apollo user password Reboot Your SmartServer Reset the SmartServer to Factory Defaults Update the SmartServer Software (Optional) Secure Your SmartServer, Managing Passwords → Restoring the Factory System Password with the Connect Button for enabling/disabling password reset using the Connect button Enhance Security for enabling/disabling enhanced security features Enhance Security for signed certificates Enhance Security for enabling 802.1x mutual authentication for eth0 or eth1 SmartServer IoT Getting Started for Remote CMS (Beta) configuration Local CMS vs. Remote CMS Set up the Remote CMS Host Computer Install and Start the Remote CMS Enable Remote CMS for Each SmartServer Connect to the Remote CMS Download Logs from the SmartServer The ability to download logs using the Logs button is available with SmartServer 4.0 and higher. Configuring HTTP Proxy HTTP proxy settings are available with SmartServer 4.0 and higher.
Network	Configuring the SmartServer IoT IP Address and Hostname Reboot Your SmartServer
LON	(Optional) Add a LON Interface
BACnet	(Optional) Add a BACnet Interface
OPC UA	(Optional) Set up the OPC UA Server
Modbus	(Optional) Add a Modbus Interface (TCP/RTU)
RS-485	(Optional) Add a Modbus RTU Interface
EnOcean	(Optional) Add an EnOcean Interface
LoRaWAN	(Optional) Add a LoRaWAN Interface
Firewall With SmartServer 4.1 and prior, this tab is called Features.	(Optional) Remotely Accessing the IAP/MQ Server
CMS	Open the SmartServer IoT CMS
Help	Use this Documentation

SmartServer IoT Configuration Page Index

With SmartServer 4.1 and prior, this tab is called Features.