SmartConnect Requires Reboot

SmartConnect is available with SmartServer 4.2 and higher.

You can reboot your SmartConnect by following the steps below.

1. Open the SmartConnect Configuration page.
   
   The SmartConnect Configuration page appears. The left-side Configuration tab that appears depends on your cache data.
   
   

   Open

   

    

2. Click the Overview tab (left-side).
   
   

   Open

   

    

3. Select Reboot from the pulldown menu.
   
   

   Open

   

    

4. A dialog box appears allowing you to enter a notification message to users who are logged into the system as well as to set a reboot delay.
   
   

   Open

   

    

5. Set the user message and delay as needed, and then click Reboot.