Using the LonScanner Protocol Analyzer for LON Devices

LON is supported for SmartConnect 4.3 and higher with the exception of LON PL.

You can use the LonScanner Protocol Analyzer to monitor all the network traffic on a LON channel. To use the LonScanner Protocol Analyzer, follow these steps:

1. If you do not have OpenLDV installed on your computer, download and install OpenLDV. Go to OpenLDV Network Driver for more information.
   
   

2. Download and install the LonScanner Protocol Analyzer. Go to LonScanner for more information.
   
   

3. Enable the SmartServer IoT RNI interface from the SmartServer LON configuration page. To do so, select the LON tab in the menu bar and enable the RNI on a LON interface such as lon0.
   
   

4. Enable the Protocol Analyzer option and click Update to save configuration changes.