SmartServer IoT CMS Widgets Index

The table below lists the CMS widgets and provides links for tasks that are associated with these widgets. In some cases (e.g., power line networks), when you first access the SmartServer CMS, the Datapoints widget poll rate will need to be changed.

See also

See SmartServer CMS Overview for more information about how to use the SmartServer CMS (i.e., menus and buttons). See SmartServer IoT Configuration Page Index for an index to the tabs for the SmartServer Configuration pages (i.e., System and Network Configuration), and links for the tasks that you can perform from the Configuration pages.

Widget	Tasks	Preview
Alarms and Events For SmartServer 3.4 and prior releases, this widget is called the Alarms widget.	Alarm and Event Management Managing Alarm Notifications Setting up Alarm Email Notifications Monitoring System Audit Events
Calendar Available with SmartServer release 2.6 and higher.	Copying a Calendar Event Creating a Calendar Event Displaying Calendar Event Information Editing a Calendar Event Managing the Calendar Navigating the Calendar Removing a Calendar Event Setting up Schedules Transformation Service Viewing the Calendar
Connections Available with SmartServer release 3.3 and higher.	Setting up Datapoint Connections
Customers	Managing Customer and User Accounts (Release 3.6 and Prior)
Datapoints Available with SmartServer release 2.5 and higher. For SmartServer 3.3 and prior releases, this widget is called the Datapoint Browser widget.	/wiki/spaces/TEMP/pages/211166198 (live data and data logs, and using Candidates and Favorite datapoint lists) To improve performance Change the Datapoints widget poll rate (which defaults to 30 seconds) immediately after accessing the SmartServer CMS. To disable polling, set the poll rate to 0. Save the poll rate value by clicking anywhere on the Datapoints widget. For power line networks, set the poll rate to a larger number (i.e.,120* seconds or 0 to disable polling).* Configuring Local I/O Using the IOX Testing Devices and Managing Datapoints	SmartServer 3.4 and higher SmartServer 3.3 and prior
Datapoint Properties	Defining Datapoint Properties
Device Types	Defining Device Types Importing and Exporting SmartServer Configuration Files
Devices For SmartServer 3.4 and higher releases, the devices widget comprises tabs for edge devices and segment controllers.	Discovering, Defining, or Importing Devices Importing and Exporting SmartServer Configuration Files Manage Licenses (available with SmartServer 3.3 and higher) Provisioning, Deprovisioning, and Replacing Devices Testing Devices and Managing Datapoints Updating the SmartServer using the SmartServer CMS with an Internet Connection Verifying the Device Location in Configure Your SmartServer (to verify your SmartServer's latitude / longitude with SmartServer 3.4 and higher)	SmartServer 3.4 and higher SmartServer 3.3 and prior See the Device State Colors* section in Testing Devices and Managing Datapoints for more information about device status and the meanings of the different device colors.*
Geozones	Assigning User Permissions and Roles
Groups	Discovering, Defining, or Importing Devices
Locations For smartServer 3.3 and prior releases, this widget is called the Map widget.	System Integration Using Geozones, Zones, Floor Plans, and Locations	SmartServer 3.4 and higher SmartServer 3.3 and prior
Planning Available with SmartServer release 2.8 and higher.	/wiki/spaces/TEMP/pages/43815838 Editing Floor Plans and Location in /wiki/spaces/TEMP/pages/43815838 (to set your SmartServer's latitude / longitude with SmartServer 3.4 and higher) To see the context menu, hover over the context name.
Report Definition	Viewing Data Trend Reports (for scalar datapoints only; for structured datapoints, use the Datapoints widget) Viewing Device Status Reports Viewing Maintenance Reports
Sequencing Available with SmartServer release 2.8 and higher.	Creating Sequence of Operations Creating User Interfaces
Settings AVAILABLE WITH SMARTSERVER 2.6 AND HIGHER. THE IAP SETTINGS FEATURE IS AVAILABLE WITH SMARTSERVER 3.2 UPDATE 2 AND HIGHER. THE WARNING LIMITS SETTINGS FEATURE IS AVAILABLE WITH SMARTSERVER 3.5. THE Authentication method, MQTT Settings, and HTTP Proxy FEATUREs are AVAILABLE WITH SMARTSERVER 4.0.	Configure Your SmartServer (Optional) Setting Datapoint Names Configure Warning Limits Configuring Authentication Method Configuring MQTT Settings Configuring HTTP Proxy
Storage For SmartServer 3.4 and higher releases, the Storage widget features are available through the Devices widget.	Backing Up, Restoring, and Cloning the SmartServer Backing Up and Cloning a SmartServer to a Multiple Sites Managing the SmartServer SD Card Viewing SmartServer Status
Users	Defining Users Managing Customer and User Accounts

SmartServer IoT CMS Widgets Index

For SmartServer 3.4 and prior releases, this widget is called the Alarms widget.

Available with SmartServer release 2.6 and higher.

Available with SmartServer release 3.3 and higher.

Available with SmartServer release 2.5 and higher.

For SmartServer 3.3 and prior releases, this widget is called the Datapoint Browser widget.

For SmartServer 3.4 and higher releases, the devices widget comprises tabs for edge devices and segment controllers.

For smartServer 3.3 and prior releases, this widget is called the Map widget.

Available with SmartServer release 2.8 and higher.

Available with SmartServer release 2.8 and higher.

AVAILABLE WITH SMARTSERVER 2.6 AND HIGHER.

THE IAP SETTINGS FEATURE IS AVAILABLE WITH SMARTSERVER 3.2 UPDATE 2 AND HIGHER.

THE WARNING LIMITS SETTINGS FEATURE IS AVAILABLE WITH SMARTSERVER 3.5.

THE Authentication method, MQTT Settings, and HTTP Proxy FEATUREs are AVAILABLE WITH SMARTSERVER 4.0.

For SmartServer 3.4 and higher releases, the Storage widget features are available through the Devices widget.