SmartServer Getting StartedUsing this Documentation (Release 4.1 and Prior) System-Level Warnings and Errors (Release 4.0 and Prior) Enable Remote CMS for Each SmartServer (Release 4.1 and Prior) Accessing the SmartServer Configuration Page (Release 3.4 to 4.1) Configure Your SmartServer (Release 3.3 and Prior) Viewing System Information (Release 3.4 to 4.1) Configuring the SmartServer IP Address and Hostname (Release 3.4 to 4.1) Open the SmartServer CMS (Release 4.1 and Prior) Obtaining Licensing Information (Release 3.3) Customize Your CMS Dashboard (Release 3.5) Customize Your CMS Dashboard (Release 3.4) Customize Your CMS Dashboard (Release 3.3 and Prior) Enhancing Security (Release 4.1 and Prior) Managing Passwords (Release 4.1 and Prior) Managing Ports and Services (Release 4.1 and Prior) Configuring HTTP Proxy (Release 4.1 and Prior) (Optional) Add a BACnet Interface (Release 3.2 to 4.1) (Optional) Setting up BACnet (Release 3.1) (Optional) Add an EnOcean Interface (Release 4.1 and Prior) (Optional) Add a LON Interface (Release 4.1 and Prior) (Optional) Switch From LON Management (Release 3.3 and Prior) (Optional) Add a Remote Network Interface (RNI) (Release 4.1 and Prior) (Optional) Add a LON IP-852 Router (Release 4.1 and Prior) (Optional) Add a LoRaWAN Interface (Beta) (Release 4.1 and Prior) (Optional) Add a Modbus RTU Interface (Release 4.1 and Prior) (Optional) Create a LON Interface for a Modbus Device (Release 4.1 and Prior) (Optional) Remotely Accessing the IAP/MQ Server (Release 4.1 and Prior) Using the OPC UA Server with AVEVA Edge (Release 4.1 and Prior) Using the OPC UA Server with GE Cimplicity (Release 4.1 and Prior) (Optional) Enabling the OPC UA Server (Release 4.1 and Prior) (Optional) Setting up the BACnet Router (Release 4.1 and Prior) Migrating from the LPR and MPR Routers to the SmartServer IoT (Release 4.1 and Prior) SmartServer Pi Getting Started(Optional) Add a LoRaWAN Interface for SmartServer Pi (Release 4.2) SmartServer IoT Configuration Page IndexSmartServer IoT Configuration Page Index (Release 4.1 and Prior) SmartServer User's GuideSite Planning Defining Users (Release 4.1) Defining Users (Release 4.0 and Prior) Defining Contexts (Release 3.3 and Prior) (Optional) Creating a BACnet Device Interface (XIF) Definition (Release 3.1) (Optional) Creating a Modbus Device Interface (XIF) Definition (Release 3.1) Defining Device Types (Release 3.4 and 3.5) Defining Device Types (Release 3.3 and Prior) Defining Datapoint Properties (Release 3.1)
Site Provisioning Discovering, Defining, or Importing Devices (Release 3.4 and 3.5) Discovering, Defining, or Importing Devices (Release 3.3 and Prior) Importing LON Devices from an LNS Network with IzoT CT (Release 4.1 and Prior) Importing LON Devices from an LNS Network without IzoT CT (Release 4.1 and Prior) Provisioning Devices (Release 3.3 and Prior) Testing Devices (Release 3.3 and Prior)
Site Integration Defining Connection Templates (Release 3.3-3.6) Managing Deployed Connections (Release 3.3-3.6) Exporting / Importing Connection Definitions (Release 3.3-3.6) Expanding / Collapsing the Datapoints View (Release 3.3-3.6) Setting Filters on the Connections Widget (Release 3.3-3.6) Defining Datapoint Connections (Release 3.0-3.2) Defining Datapoint Connections (Release 2.9) Creating User Interfaces (Release 3.3 and Prior) IOX Modbus Software Setup (Release 3.3 and Prior) Digital Output Configuration (Release 3.3 and Prior) Digital Input Configuration (Release 3.3 and Prior) Relay Output (Release 3.3 and Prior) Metering Input (Release 3.3 and Prior)
Site Operation Managing Alarm Notifications (Release 4.1 and Prior) Viewing Active Alarms (Release 2.5 - 3.4)
Site Maintenance Viewing SmartServer Status (Release 3.3 and Prior) Downloading Logs (Release 4.1 and Prior) Managing Customer and User Accounts (Release 3.6 and Prior) Updating using the SmartServer CMS (Release 3.3 and Prior) Updating the SmartServer using the SmartServer Configuration Page (Release 4.1 and Prior) Backing Up, Restoring, and Cloning the SmartServer (Release 3.5 - 4.1) Backing Up, Restoring, and Cloning the SmartServer (Release 3.4) Backing Up, Restoring, and Cloning the SmartServer (Release 3.3 and Prior) Backing Up and Replacing a SmartServer (Release 3.4) Backing Up and Replacing a SmartServer (Release 3.3 and Prior) Cloning and Deploying a SmartServer to Multiple Systems (Release 3.4) Cloning and Deploying a SmartServer to a Multiple Sites (Release 3.3 and Prior) Exporting and Importing a SmartServer Configuration (Release 3.4) Managing the SmartServer SD Card (Release 3.4) Managing the SmartServer SD Card (Release 3.3 and Prior)
Site Diagnostics Using the UaExpert OPC UA Client (Release 4.1 and Prior) SmartServer TroubleshootingRebooting Your SmartServer (Release 4.1 and Prior) Resetting the SmartServer to Factory Defaults (Release 4.1 and Prior) SmartServer IoT Starter Kit User's GuideConfiguring the Network (Release 4.1 and Prior) Setting up the LON Channel (Release 3.4 to 4.1) Setting up the LON Channel (Release 3.3 and Prior) Setting up the Modbus RTU Channel (Release 3.4 to 4.1) Setting up the Modbus RTU Channel (Release 3.3 and Prior) Setting up the BACnet Channel (Release 3.4 to 4.1) Setting up the BACnet Channel (Release 3.3 and Prior) SmartServer Developer’s GuideCreating Custom Drivers (Release 3.3 and Prior)
|