SmartServer IoT Specifications
- Nina Cardillo
- Rich Blomseth
Hardware Specifications
The hardware for the SmartServer IoT has the following specifications:
Item | Specification |
|---|---|
Processor | 800 MHz Quad Core ARM Cortex A9 Quad core vs. dual core Starting with Revision F of the SmartServer IoT, all SmartServers include a quad core ARM processor. Earlier SmartServer IoTs included a dual core processor. To determine which processor you have, read the label on the bottom of the SmartServer. The serial number printed just under the product name includes one letter. If the letter is F or later, you have a quad core processor. If the letter is A through E, you have a dual core processor. For more information, see the SmartServer Release Notes for SmartServer IoT 2.9. |
| Operating System | Linux |
| Security | TLS with AES 128-bit encryption |
Real-time Clock | Internal with 72-hour power-fail date/time retention |
Built-in Memory | 2 GB DDR3L SDRAM 8 GB eMMC flash memory |
Memory Expansion | 32GB Micro SD card (included) |
| Device Support | Up to 1,000 total devices; 20,000 datapoints |
Wired Interfaces | Gigabit Ethernet: 2 RJ-45 jacks for WAN and LAN, including LON IP-70, LON IP-852, BACnet/IP, and Modbus TCP RS-485: 2 4-pin terminal blocks for Modbus RTU and other RS-485 communication (Pro EX model only) USB host: 4 Type-A 2.0 ports for USB LON network interfaces and USB flash drives USB device: 1 Micro-B console port USB OTG: 1 Micro-B flash memory port |
Wireless Interfaces | None |
Input Voltage | 10.5-30VDC, 10W or isolated 12-30VAC, 12VA, 50/60Hz (see Providing Power to the SmartServer) |
Temperature Range | -40°C to +65°C |
Surge Protection | EN 61000-4-5:2006, +/- 4KV |
Mounting | DIN 43880 8TE |
Shock | 100g or 1000m/s2 |
Vibration | 6g or 59m/s2 |
| Reliability | Using Telcordia SR-332 methodology:
|
More Information and Technical Support
If you have technical questions that are not answered by the documentation, you can contact EnOcean technical support at edge.support@enocean.com.