SmartServer IoT Configuration Page Index
- Nina Cardillo
For SmartServer 4.1 and prior, see SmartServer IoT Configuration Page Index (Release 4.1 and Prior).
The table below provides an index to the tabs for the SmartServer Configuration page and provides links for the tasks that you can perform from the Configuration page.
See also
Configuration Page Tour video that describes the tabs of the Configuration pages for the SmartServer IoT.
SmartServer CMS Overview for more information about the key parts and buttons that appear on the SmartServer CMS.
SmartServer CMS Widgets Index for a description of the CMS widgets and links for tasks that are associated with these widgets.
| Configuration Page | Tasks | Configuration Page Preview |
|---|---|---|
System | (Optional) Switch From LON Management – switch from Device Management Mode (DMM) to Independent Management Mode (IMM) Reset the SmartServer to Factory Defaults Update the SmartServer Software Download Logs – this feature is available with SmartServer 4.0 and higher (Optional) Secure Your SmartServer – configure System Configuration page settings, change the system password for both the apollo system and CMS apollo user passwords, change user passwords (only the CMS apollo user password), or restore the factory system password with the Connect button Enhance Security – enable/disable enhanced security features, use signed certificates, and enable 802.1x mutual authentication for eth0 or eth1 Configuring Advanced Intrusion Detection Environment (AIDE) – AIDE is an open source, Linux operating system file and directory integrity checker. For SmartServer 4.3 and higher, AIDE is disabled by default and configurable through the System Configuration page to run once a day. For SmartServer 3.5 to 4.2 Update 1, AIDE is enabled by default to run a daily cron job and can be disabled manually through an SSH console session. Configuring HTTP Proxy – this feature is available with SmartServer 4.0 and higher |
|
| Network |
| |
| LON |
| |
| BACnet |
| |
| OPC UA | (Optional) Set up the OPC UA Server |
|
| Modbus | (Optional) Add a Modbus Interface (TCP/RTU) |
|
| RS-485 | (Optional) Add a Modbus RTU Interface |
|
EnOcean EnOcean Local Mode is available with SmartServer 4.0 and higher.EnOcean Remote Mode (beta) is available with SmartServer 4.3 Update 1 and higher. |
| |
LoRaWAN LoRaWAN devices are supported with SmartServer 4.0 and higher; beta for SmartServer 4.0 and 4.1. | (Optional) Add a LoRaWAN Interface |
|
Firewall For SmartServer 4.1 and prior, the Firewall tab is called Features. | (Optional) Remotely Accessing the IAP/MQ Server |
|
| CMS |
| |
| Help | Use this Documentation |
|
