/
U70 PL-20 Specifications

U70 PL-20 Specifications

This section includes the following topics:

Hardware Specifications

The hardware for the U70 PL-20 has the following specifications:

Item               

Specification                  

Item               

Specification                  

Processor

EnOcean PL Smart Transceiver

Built-in Memory

1 MB flash memory, 64 KB RAM

Host Interface

USB Micro-B 2.0

Mains Interface

1 – 3 phase AC

Input Voltage

100 – 277VAC +/- 10%, 50–60Hz +/-5% (AC mains power input, single phase used for power; up to three phases used for communication)

Input Power

2.5W no-load max (for Vin ≤ 120VAC)

35W max

Output Voltage

24VDC +/- 5%

Output Current

350mA max

Operating Temperature

-40°C to +70°C

Operating Humidity

5% to 95% RH non-condensing @ 50°C

Surge Protection

EN 61000-4-5:2006, +/- 6KV

Reliability

Using MIL-HDBK-217 Method II:

  • 24°C: MTBF 406,100 hours (46 years)

  • 70°C: MTBF 104,700 hours (12 years)

Mounting

DIN 43880 7TE

More Information and Technical Support

If you have technical questions that are not answered by the documentation, you can contact EnOcean technical support at edge.support@enocean.com


Related content

U70 LON PL-20 USB Network Interface Module
U70 LON PL-20 USB Network Interface Module
More like this
General Information
General Information
More like this
U70 PL-20 Regulatory Compliance Statements
U70 PL-20 Regulatory Compliance Statements
More like this