(Optional) Add an IOX I/O Interface

Owned by Nina Cardillo
27-Sept-2023

You can add an external IOX I/O Expansion Module to interface with local digital inputs, digital outputs, and relay outputs.  You can add an external IOX with Power Measurement to monitor energy consumption, power usage, and key electrical characteristics such as voltage, current, and power factor.  You can add up to three external IOX devices.

To add an external IOX, connect the IOX USB interface to one of the USB host interfaces on the SmartServer IoT. The IOX must be plugged directly into the SmartServer.  You cannot plug the IOX into an external USB hub that is connected to the SmartServer. 


The following IOX devices are available for the SmartServer IoT:

Model Number     Product Name                               

Description                                                       

41700-100IOX I/O Expansion

8 Digital Inputs for Level In, Frequency In, or Pulsecount In

6 digital outputs for Level Out, Pulse Out, Frequency Out, or PWM Out

2 Relay Outputs

1 Isolated RS-485 Serial Bus Interface for Modbus RTU

41700-110IOX I/O Expansion with Power Measurement

8 Digital Inputs for Level In, Frequency In, or Pulsecount In

6 digital outputs for Level Out, Pulse Out, Frequency Out, or PWM Out

2 Relay Outputs

1 Isolated RS-485 Serial Bus Interface for Modbus RTU

3-Phase Power Measurement Input (Model 41700-220 only)